Page All:
Page 1
Allion Test Labs Selects LeCroy USB 3.0 Test Suite for Complete SuperSpeed USB Compliance Testing
CHESTNUT RIDGE, N.Y., March 11 -- LeCroy Corporation, a leading supplier of oscilloscopes and serial data test solutions, announced that Allion Test Labs has selected its USB 3.0 Test Suite for complete SuperSpeed USB Compliance Testing. Allion will use LeCroy's equipment to provide manufacturers with comprehensive physical and protocol layer transmitter and receiver testing. In addition to SuperSpeed USB, LeCroy will provide Allion with complete solutions for testing SATA and other high-speed serial data standards.
"LeCroy's USB 3.0 Test Suite is the solution that fully integrates transmitter and receiver testing to meet the compliance requirements for SuperSpeed USB," said James Ou, Allion's Director of Personal Application Testing Center. "LeCroy's end-to-end test equipment lineup addresses the increasingly sophisticated measurement and analysis capabilities that are required by SuperSpeed USB, and we are pleased to be able to offer this preeminent solution to our customers."
"LeCroy is happy to supply Allion with a complete solution for SuperSpeed USB compliance testing," said Conrad Fernandes, LeCroy's Vice President for Asia Pacific. "As signal speeds increase, compliance testing and debug become more challenging. LeCroy's innovative solutions for testing high-speed serial data will enable Allion and their customers to perform these tests faster, more comprehensively, and at lower cost."
The LeCroy USB 3.0 Test Suite includes the SDA 813Zi oscilloscope for physical layer transmitter verification, compliance and debug; the protocol-enabled receiver and transmitter tolerance tester, PeRT3(TM), for receiver testing; the WaveExpert(TM) sampling oscilloscope for critical characterization and TDR measurements; and the world's first USB 3.0 protocol analyzer exerciser platform, the Voyager(TM) verification system, to address the protocol layer.
LeCroy's revolutionary PeRT3 is a protocol-aware receiver tester that integrates receiver test with protocol-awareness. It provides the ability to automate testing through active control of the device under test. It is also able to easily manage through protocol issues such as SKP symbols which can interrupt testing on competitive products. Together with LeCroy's WaveMaster 813Zi oscilloscope, QPHY-USB3-Tx-Rx automation compliance test software, and other accessories, it performs complete physical layer compliance tests faster than alternate solutions that are not protocol-aware. PeRT3 is currently in use at leading labs worldwide, including the Peripherals Integration Lab (PIL).
In addition, the Voyager protocol analyzer exerciser system provides a full-function analyzer, capable of recording and analyzing traffic between both USB 2.0 or 3.0 devices. The integrated exerciser can emulate USB 3.0 device behaviors to allow functional, reliability, and performance testing.
About Allion
Allion Test Labs, Inc. is a global Information Technology (IT) testing organization conducting certification, interoperability, performance and compatibility testing services for companies all over the world. Allion has more than 300 certified test engineers, who leverage a multi-million dollar inventory of state-of-the-art test equipment and devices to provide IT developers with cost-effective and quality product assurance solutions. Company information is available at http://www.allion.com.
About LeCroy Corporation
LeCroy Corporation is a worldwide leader in serial data test solutions, creating advanced instruments that drive product innovation by quickly measuring, analyzing and verifying complex electronic signals. The Company offers high-performance oscilloscopes, serial data analyzers and global communications protocol test solutions used by design engineers in the computer, semiconductor and consumer electronics, data storage, automotive and industrial, and military and aerospace markets. LeCroy's 45-year heritage of technical innovation is the foundation for its recognized leadership in "WaveShape Analysis" - capturing, viewing and measuring the high-speed signals that drive today's information and communications technologies. LeCroy is headquartered in Chestnut Ridge, New York. Company information is available at http://www.lecroy.com.
Specifications are subject to change without notice.
Media
contact: Patrick Brightman - SGW (973) 263-5475
Editors'
Technical
contact: Christopher Busso - Product Marketing Manager (845) 425-2000
Customer
contact: LeCroy Customer Care Center (800) 553-2769
Website: http://www.lecroy.com
Source: LeCroy Corporation
CONTACT: Media, Patrick Brightman of SGW for LeCroy Corporation,
+1-973-263-5475, or Editors' Technical contact, Christopher Busso, Product
Marketing Manager of LeCroy Corporation, +1-845-425-2000, or Customer contact,
LeCroy Customer Care Center, +800-553-2769
Web Site: http://www.lecroy.com/
Allion Test Labs Selects LeCroy USB 3.0 Test Suite for Complete SuperSpeed USB Compliance Testing
CHESTNUT RIDGE, N.Y., March 11 -- LeCroy Corporation, a leading supplier of oscilloscopes and serial data test solutions, announced that Allion Test Labs has selected its USB 3.0 Test Suite for complete SuperSpeed USB Compliance Testing. Allion will use LeCroy's equipment to provide manufacturers with comprehensive physical and protocol layer transmitter and receiver testing. In addition to SuperSpeed USB, LeCroy will provide Allion with complete solutions for testing SATA and other high-speed serial data standards.
"LeCroy's USB 3.0 Test Suite is the solution that fully integrates transmitter and receiver testing to meet the compliance requirements for SuperSpeed USB," said James Ou, Allion's Director of Personal Application Testing Center. "LeCroy's end-to-end test equipment lineup addresses the increasingly sophisticated measurement and analysis capabilities that are required by SuperSpeed USB, and we are pleased to be able to offer this preeminent solution to our customers."
"LeCroy is happy to supply Allion with a complete solution for SuperSpeed USB compliance testing," said Conrad Fernandes, LeCroy's Vice President for Asia Pacific. "As signal speeds increase, compliance testing and debug become more challenging. LeCroy's innovative solutions for testing high-speed serial data will enable Allion and their customers to perform these tests faster, more comprehensively, and at lower cost."
The LeCroy USB 3.0 Test Suite includes the SDA 813Zi oscilloscope for physical layer transmitter verification, compliance and debug; the protocol-enabled receiver and transmitter tolerance tester, PeRT3(TM), for receiver testing; the WaveExpert(TM) sampling oscilloscope for critical characterization and TDR measurements; and the world's first USB 3.0 protocol analyzer exerciser platform, the Voyager(TM) verification system, to address the protocol layer.
LeCroy's revolutionary PeRT3 is a protocol-aware receiver tester that integrates receiver test with protocol-awareness. It provides the ability to automate testing through active control of the device under test. It is also able to easily manage through protocol issues such as SKP symbols which can interrupt testing on competitive products. Together with LeCroy's WaveMaster 813Zi oscilloscope, QPHY-USB3-Tx-Rx automation compliance test software, and other accessories, it performs complete physical layer compliance tests faster than alternate solutions that are not protocol-aware. PeRT3 is currently in use at leading labs worldwide, including the Peripherals Integration Lab (PIL).
In addition, the Voyager protocol analyzer exerciser system provides a full-function analyzer, capable of recording and analyzing traffic between both USB 2.0 or 3.0 devices. The integrated exerciser can emulate USB 3.0 device behaviors to allow functional, reliability, and performance testing.
About Allion
Allion Test Labs, Inc. is a global Information Technology (IT) testing organization conducting certification, interoperability, performance and compatibility testing services for companies all over the world. Allion has more than 300 certified test engineers, who leverage a multi-million dollar inventory of state-of-the-art test equipment and devices to provide IT developers with cost-effective and quality product assurance solutions. Company information is available at http://www.allion.com.
About LeCroy Corporation
LeCroy Corporation is a worldwide leader in serial data test solutions, creating advanced instruments that drive product innovation by quickly measuring, analyzing and verifying complex electronic signals. The Company offers high-performance oscilloscopes, serial data analyzers and global communications protocol test solutions used by design engineers in the computer, semiconductor and consumer electronics, data storage, automotive and industrial, and military and aerospace markets. LeCroy's 45-year heritage of technical innovation is the foundation for its recognized leadership in "WaveShape Analysis" - capturing, viewing and measuring the high-speed signals that drive today's information and communications technologies. LeCroy is headquartered in Chestnut Ridge, New York. Company information is available at http://www.lecroy.com.
Specifications are subject to change without notice.
Media
contact: Patrick Brightman - SGW (973) 263-5475
Editors'
Technical
contact: Christopher Busso - Product Marketing Manager (845) 425-2000
Customer
contact: LeCroy Customer Care Center (800) 553-2769
Website: http://www.lecroy.com
Source: LeCroy Corporation
CONTACT: Media, Patrick Brightman of SGW for LeCroy Corporation,
+1-973-263-5475, or Editors' Technical contact, Christopher Busso, Product
Marketing Manager of LeCroy Corporation, +1-845-425-2000, or Customer contact,
LeCroy Customer Care Center, +800-553-2769
Web Site: http://www.lecroy.com/